B
LDU ERROR CODES
en-109
Safety, Operation, & Maintenance Manual
Lithium
Signal 2 Offset Out of Range:
The adapted offset is too high or too
low.
Signal 1 Saturated High:
The signal 1 raw AD value saturate is
high. This indicates a short circuit.
Signal 1 Saturated Low:
The signal 1 saturated is low. This
indicates a short circuit.
Signal 2 Saturated High:
The signal 2raw AD value saturate is
high. This indicates a short circuit.
Signal 2 Saturated Low:
The signal 2saturated is low. This
indicates a short circuit.
SIN COS Sensor Not Connected:
Check that the unit circle is consis-
tent. This will detect one broken sig-
nal even if the sensor is not rotating.
Sensor Supply SHC:
The sensor supply current is too high.
The limit is 0.068 A.
LDU Error Code Description
Caution
LED
Alarm
Sound-
ing
Engine
Stop
Traction
Stop
Mow Stop
On Off Yes No Yes No Yes No Yes No
To Next Page
Loading...
