B
en-110
Safety, Operation, & Maintenance Manual
LDU ERROR CODES
Lithium
Sensor Supply Not Connected:
The sensor supply current is too low.
The limit is 0.000 A
Sensor Supply Reference Range:
The sensor supply reference voltage
is out of range. The valid range is
10.0V to 16.0V.
Sensor Supply Range:
The sensor supply voltage is out of
range. The valid range is 10.0V to
16.0V.
Dec Too High:
The change of sensor speed is too
high.
Wrong Direction / Plausibility Error:
The sensor and stator frequency have
different signs. Either the sensor sig-
nals need to be inverted or the motor
phase cables are connected incor-
rectly.
The sensor speed is too high, i.e. not
plausible/possible.
LDU Error Code Description
Caution
LED
Alarm
Sound-
ing
Engine
Stop
Traction
Stop
Mow Stop
On Off Yes No Yes No Yes No Yes No
To Next Page
Loading...
