en-50
JACOBSEN G-PLEX III Series: FH & FJ
SAFETY AND OPERATORS MANUAL
9.25 BATTERY
The factory installed battery is "Low Maintenance."
Add liquid only as required.
NOTE: Keep top of battery clean and free of
corrosion by washing with a solution of
baking soda and water OR ammonia and
water. Rinse with clean water. Batteries
with heavy corrosion should be removed
and cleaned with solution.
Battery cables should be disconnected before using
a "Fast Charger.
9 LUBRICATION & MAINTENANCE
Dispose of used batteries in accordance with
local regulations.
Wear eye protection when servicing battery.
Battery electrolyte is an acidic solution
and should be handled with care. If
electrolyte is splashed on any part of the
body, immediately flush the exposed area
with liberal amounts of water and obtain
medical aid immediately.
Battery posts, terminals and related
accessories contain lead and lead
compounds.
WASH HANDS AFTER HANDLING
UNTRAINED / UNAUTHORIZED persons
should NEVER attempt to service or
recharge the battery in this machine.
Battery electrolyte is an acidic solution
and should be handled with care. If
electrolyte is splashed on any part of the
body, immediately flush the exposed
area with liberal amounts of water and
obtain medical aid immediately.
DO NOT allow flames or sparks near the
battery when connecting for jump starting
or charging.
Hydrogen gas is produced during the
charging process and can be explosive.
Provide adequate ventilation to prevent
possible explosion.
UNTRAINED/UNAUTHORIZED persons
should NEVER attempt to service or
recharge the battery in this unit.
To Next Page
Loading...
