10.2 Activate Jet Pumps
The control panel JETS 1 button activates jets pump 1. The rst press
activates low speed, the second press activates high speed, and the third
press shuts jets pump 1 off. The JETS 2 button activates jets pump 2.
The rst press activates high speed, the second press turns jets pump 2
off. When manually activated, either pump will automatically turn off after
20 minutes.
10.3 Multi-Colored LED Light System Operation
The multi-colored LED spa light offers seven constant color
variations and three unique random modes for enhanced spa
enjoyment. Press the Light button once to activate the rst
light mode Random Fade, then continue pressing the button
to either turn the light off or to select one of seven constant colors,
random solid color mode or strobe mode as illustrated below.
Spa Light Sequence
DARK
DARK
BLUE
RED
LIME
OFF
RANDOM
FADE
RANDOM
STROBE
OFF
OFF OFFOFFOFF
OFF OFF
NEAR
WHITE
VIOLET
LIGHT
BLUE
Light Operation Tips:
You must press the light button within 3 seconds of any “off” condition or the
light sequence will revert back to “Random Fade” mode, when reactivated.
Anytime the spa light is manually activated, it will remain on for 1 hour
then automatically shut off.
10.4 Adjusting Individual Jet Flow
The water ow through certain jets in your spa can be
adjusted or turned off by rotating the outside jet ring. These
jets include:
• Classic Mini Jet
• Classic Euro Jet
• Classic Direct Jet
• Classic Pulsator Jet
Other jets also offer an adjustable center nozzle that
allows you to change the water discharge angle. Simply
tilt the center nozzle in these jets to the desired angle to custom-
ize your personal massage. These jets include:
• Classic Mini Jet
• Classic Luxury Jet
• Classic Whirl Jet
• Classic Pulsator Jet
Note: Always keep at least 6 adjustable jets open at all times to ensure
proper ltration characteristics within spa.
Classic Whirl Jet
Classic Luxury Jet
Classic Pulsator Jet
26
To Next Page
Loading...
