Operation
Panel Lock
The panel lock is provided to prevent tampering with the control panel. When the panel lock
is engaged, all the automatic hot tub functions will operate normally. Press the following
buttons within 3 seconds to activate the lock:
Press . The center display will read LOC. Then press . The center display
will read 0. Then press . The center display will read .
Temperature Lock
The temperature lock is provided to prevent unauthorized temperature adjustment of your hot
tub. While setting your hot tub water temperature, and after you have pressed
or , follow the instructions below to lock the set temperature. When the
temperature lock is engaged, all automatic hot tub functions will operate normally.
These buttons must be pressed within 3 seconds to activate the lock. When locked, the
display will show the hot tub temperature, the lock symbol, and the words SET HEAT. When
the hot tub is in the temperature locked mode, the temperature buttons are deactivated.
When pressed, the set temperature will appear with a double arrow next to it.
Press . The display will read LOC F. Then press . The display will read 0.
Then press . The display will read
SET HEAT.
Page 20
To Next Page
Loading...
