LOCATION OF SENSOR
LOCATION OF SENSOR
MANUAL
CONTROLLER
Operation
Display Messages (Continued)
Message
ICE
Sn1
Sn3
Meaning
Freeze Protection: If a freeze condition is detected, the pump(s) are automatically
activated. This is also a normal hot tub function;
no corrective action is necessary.
Open Sensor: The hot tub is deactivated. The high limit temperature sensor is
nonfunctional. This must be repaired by a dealer or service organization.
Open Sensor: The hot tub is deactivated. The water sensor is nonfunctional. This
also must be repaired by a dealer or service organization.
Optional Remote Controller
The remote controller works in conjunction with the built in controller. To use the remote
controller, point the front of the remote toward a sensor on the hot tub wall (locations shown
below).
Page 22
LIGHT
BUTTON
BLOWER BUTTON
JETS BUTTON
POINT
TOWARD
SENSOR
To Next Page
Loading...
