Maintenance
Factory Installed Wood Skirt
Your hot tub is supplied with a factory-installed wood skirt which completely surrounds the hot
tub. The skirt can be opened for service.
If it becomes necessary to remove one or more of the skirt panels for service access, simply
remove all the screws from the panel being detached.
The panels can be reattached to the hot tub by reversing the above procedure.
NOTE: When you remove the skirt, you will notice the plastic covered insulating batts.
These batts are designed to be removed when service is required and reinstalled when
service has been completed.
Page 35
To Next Page
Loading...
