Jacuzzi SALON User Manual

ENGLISH
8
Jacuzzi Whirlpool Bath EL21000B 10/06
SPECIFICATIONS (Corner) RH = RIGHT HAND
NOTE: The overall dimensions are nominal with a tolerance of +0 and -1/4" (6,4 mm).
FOR ALL UNITS: Electrical Service Requirements: All require a dedicated GFCI protected separate circuit.
Blower: 120 VAC, 20 AMP, 60 Hz. dedicated GFCI protected separate circuit.
Motor/Pump and RapidHeat™: 240 VAC, 20 AMP, 60 Hz. dedicated GFCI protected separate circuit.
FUZION™ 6666
UNDERMOUNT
RH
BELLAVISTA
CORNER
RH
FUZION™ 6666
WITH TEAK or
WENGE
RH
66” (1676 mm) L
66” (1676 mm) W
24” ( 610 mm) H
60” (1524 mm) L
60” (1524 mm) W
25” ( 635 mm) H
66” (1676 mm) L
66” (1676 mm) W
25-1/4” ( 641 mm) H
Not Available
Not Available
Min - 124 U.S. gal
(469 liters)
Max - 176 U.S. gal
(666 liters)
184 lb
(83.5 kg)
110 lb
(50 kg)
Min - 124 U.S. gal
(469 liters)
Max - 176 U.S. gal
(666 liters)
256 lb
(116.4 kg)
Not Available
1165 lb
(530 kg)/
49.6 lb/ft
2
(242 kg/m
2
)
1923 lb
(874 kg)/
72.6 lb/ft
2
(354 kg/m
2
)
1851 lb
(841 kg)/
69.8 lb/ft
2
(340 kg/m
2
)
16-13/16” (427 mm) A
12-1/8” (308 mm) B
18-7/8” (479 mm) A
14” (356 mm) B
16-13/16” (427 mm) A
12-1/8” (308 mm) B
Template
Provided
P/N
P654000
See
Page 12
Template
Provided
P/N
DD43000
Factory Installed
(BN60000 HEATER 230V)
MODEL
PRODUCT
WEIGHT
OPERATING
GALLONAGE
TOTAL WEIGHT/
FLOOR LOADINGDIMENSIONS DRAIN/OVERFLOW
SKIRT &
MOUNTINGCUTOUT
HEATER
Factory Installed
(BN60000 HEATER 230V)
Factory Installed
(BN60000 HEATER 230V)
CORNER BATHS
SPECIFICATIONS
(159 mm)
6-1/4"
SIDE VIEW END VIEW
DRAIN/OVERFLOW
B
A
(Intake Heater)
(Motor)
25-1/4"
66"
66"
(Blower)
FUZION™ 6666 with wood
25"
SIDE VIEW
A
B
DRAIN/OVERFLOW
(Inlet Heater)
(Motor)
(Blower)
60"
END VIEW
2”
(51 mm)
BELLAVISTA™ CORNER
SIDE VIEW END VIEW
DRAIN/OVERFLOW
B
A
(Inlet Heater)
(Motor)
24"
66"
(
127 mm
)
5"
66"
(Blower)
FUZION™ 6666 undermount
Min - 77 U.S. gal
(291 liters)
Max - 83 U.S. gal
(314 liters)

Jacuzzi SALON Specifications

General

Brand	Jacuzzi
Model	SALON
Category	Hot Tub
Language	English