To Next PageTo Next PageWhat to do if Jadever Accessories exceeds the A/D resolution range?
If your Jadever Accessories exceeds the A/D resolution range, it could be due to an A/D failure, in which case you should replace the A/D. Alternatively, it might be a LOAD CELL failure, requiring replacement or service assistance.
What to do if accumulated number of weighments exceeds the display range for Jadever Accessories?
If the accumulated number of weighments exceeds the display range on your Jadever Accessories, simply delete the exceeding weighments to resolve the issue.
Why does my Jadever Accessories exceed tare or pre-tare range?
If your Jadever Accessories exceeds the tare or pre-tare range, ensure that the tare value is above zero and less than or equal to the full load. Also, place the correct weights (calibration value/full load).
What to do if Jadever Accessories exceed the zero range?
General| Capacity | 7.5 kg |
|---|---|
| Readability | 0.1g |
| Division | 1/75000 |
| Auto Power Off | Yes |
| Overload Protection | Yes |
| Power Supply | AC adapter and rechargeable battery |
| Display | LCD |
| Units | g, lb, oz |
Technical specifications and general features of the JWL weighing indicator models.
Description and identification of components located on the front panel of the weighing indicator.
Details on the LCD display, including indicators, symbols, and their meanings.
Information on the power supply options, including AC adapter and rechargeable battery.
Procedure for entering and navigating the function setting menu.
Explanation of various parameter values and their settings within the function menu.
Basic procedure for performing weighing operations on the scale.
Instructions for performing manual tare and preset tare operations.
Configuration and operation of the check weighing function, including limit settings.
Procedure for using the simple counting function to count items.
How to use accumulation, display, and clear functions for weighing data.
Steps to initialize the printer through the indicator's operation menu.
List of commands that can be input via computer for scale control.
Diagram illustrating the RS-232 serial interface connections and pinouts.
