Jadever SKY - Panel Illustration; Single Point Calibration of Weight

Electronic Scale
3
Panel Illustration
1
Level
6
Stable indicator
2
Warming up indicator
7
Tare key
3
Sampling/Backlight key
8
Zero key
4
Function selection key
9
Weight display window
5
Unit conversion key
Single Point Calibration of
Weight
Step 1: Power off while holding down 「MODE」key, and then press 「ON/OFF」to switch
on the scale. The screen will show the following:
Count
Step 2: Press the 「MODE」key, the screen will show the following:
CAL
Step 3: Press the 「UNIT」key to start zero point calibration. Make sure there is nothing on
the weighing pan. The screen will show the following:
ZEro
Please wait for the screen to show: