Jadever SKY User Manual

Electronic Scale
7
The LCD display XXXX X represents the backlight setting. Press「UNIT」to select
the desired backlight setting and press「MODE」to return to LCD display LigH 。
『 onoFF- means auto-backlight, oFF-means backlight off, ON-means backlight on 』
9. When the LCD display shows Print , press「UNIT」 to enter printing mode
selection. LCD display Pr-XX X represents the printing mode. Press「UNIT」to
select the desired printing mode and press「MODE」 to return to LCD display
Print . 『 Pr-Co-means continuous output, Pr-St –means stable output 』
10. When the LCD display shows Pr Fu , press「UNIT」 to enter external device
selection mode. LCD display XXXX X represents external device. Press「UNIT」
to select the desired external device, then press「MODE」 to return to LCD display
Pr Fu . 『 -PC— external PC, SH-24 – external dot matrix mini printer 』
11. When the LCD display shows diV-Z , press 「UNIT」 to enter external device
selection mode. LCD display ZEroX X represents display range. Press「UNIT」to
select the desired external device, then press「MODE」to return to LCD display
diV-Z 。 『 Zero0, 1, 2, 3, 4, 5 』 (means weight displayed when the weight exceeds the
capacity)
12. Before entering function setting, press 「SMPL」to end function setting and return to
normal weighing mode. Press the「MODE」key continuously to select function setting
modes.
Units Conversion Table
1
ct
[MET.CARAT]
=0.1999694 g
1
lb
[AVORIRDUPOIS POUND]
=453.59237 g
1
oz
[AVORIRDUPOIS OUNCE]
=28.349523125 g
1
dr
[AVOIRDUPOIS DRAM]
=1.7718451 g
1
GN
[GRAIN](U.K)
=0.06479891 g
1
ozt
[TROY OUNCE]
=31.1034768 g
1
dwt
[PENNY WEIGHT]
=1.55517384 g
1
MM
[MOMME] (JPN)
=3.749996 g
1
tl.j
[HONG KONG JEWELRY TAEL]
=37.4290018 g
1
tl.T
[TAEL](TWN)
=37.49995 g
1
tl.H
[HONG KONG TAEL]
=37.799375 g
1
t
[TOLA] (INDIA)
=11.6638038 g
1
oz/yd
2
=0.33898306 g
1
g/m
2
=0.01 g

Jadever SKY Specifications

General

Brand	Jadever
Model	SKY
Category	Scales
Language	English