EasyManua.ls Logo

Jafanda JF180 - Product Features; Operating Instructions

Default Icon
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
6
Combine Multiple Functions
High-Efficiency Purification: Remove PM 2.5, smog,
pollen and other particulate pollutants.
Fan speed stepless regulation
Replacement Filter
Adjustable colorful ambiance lights
Built-in essential oil box and aroma pad, add
essential oil to freshen the air continuously
2. Lift the filter cover from the air purifier.
3. Take out the new filters with plastic packaging.
1. Press down down the button on rear cover plate
and pull it out slightly, then take out 2x Filter.
4. Remove the protective film on the filter
before use.
5. Put into New 2x Filter without protective
film.
6. Close the rear cover plate,then it is done.
Product features
Operating instructions
3重净化技术
3-Stages Filtration System
Pre-filter
Activated
carbon filter
HEPA Filter
HEPA Filter
Intercepts hair, dander, fibers, and particles of visible large size. Can be vacuumed
regularly.
H13 HEPA filter for high-efficiency filtration of particles as small as 0.3 micron, such
as PM2.5, smoke, pollen, dust, and other pollutants.
High iodine value activated carbon, effective adsorption of VOC, cigarette odor, pet
odor, and other harmful gases.
Pre-filter
Activated
carbon filter
Note: activated carbon fiter, HEPA filter and Pre-filters are compounded in the same filter.
All filters are included inside the air purifier.
Before use, make sure the plastic bag outside the filter is
removed and installed properly.
Precautions
for use

Related product manuals