Getting Started
7. Press the essential oil box and the box will
pops up.
7
8
8. Take out the essential oil box.
① When it’s powered on, there is a “DING” sound.
9. Add an appropriate amount of essential oil to
the aroma pad inside the essential oil box(Be
careful not to overflow).
10. Put the essential oil box in and buckle it
up in place.
② Rotate the knob and adjust it to the fan speed appropriate.
7
8
9
10
Operating instructions
Using your air purifier
When you rotate the knob in standby status, rotate the knob clockwise to
power on, and rotate the knob counterclockwise to the leftmost end to
power off.
In the initial state of power-on, the light and filter life buttons are light white,
and the ambient light has seven colors, which cycle continuously in the order
of white, red, orange, yellow, green, blue, blue, and purple (a cycle is 32
seconds) .
Touch the light button once, and the ambient light will lock the current color.
Touch the light button twice to turn off the ambient light. At this time, the filter
life and light buttons are dimly lit.
Touch the light button for the third time to turn off all lights (ambient light, filter
life and light buttons are all off)
The fourth time to touch any button, the machine will wake up, and at the
same time, return to working states before the light is turned off.
So 1,2,3,4 cycle operation.
When the machine is working, turn the knob clockwise to adjust it to maximum
fan speed. Turn it counterclockwise to lower the fan speed until shutdown.
Filter replacement:
he lifetime of the filter is 3000 hours (about 6 months). When the lifetime is less
than 3%, the indicator of filter lifetime flashes red (0.5 seconds/time),
it reminds you that’s the time to prepare new filters for replacement, if the reset
is not completed after 30 minutes, the red light will be steady long on, (After
replace new filter) now please tap and hold the filter button for 3 seconds or
more, then the red light will be turned off with 3 beeps"dididi".it indicates that
the resetting of filter life is successful and the white light will light up again.
Filter life reset:
Unplug the power supply first, then plug in and don’t turn it on (keep the knob
stay off). Within 20 seconds, long press the filter life icon for more than 3
seconds(don’t release it, keep touch), you will hear 1 beeps"di", then use
another hand to tap the light button for 3 times (every times with 1 beeps ”di”
sound), now you can release you both hand, then you will hear 3 beeps"dididi",
it indicates that the resetting of filter life is successful.
Power On / Off
Lighting
Fan speed
Filter Reset
Symbol Symbol name Meaning
P
o
w
e
r
O
n
To Next Page
Loading...
