ADwin Installation, manual version 2.1, December 2005 7
ADwin ISA link interface
ADwin
Select for each ADwin system with ISA interface, which is to be installed, a
separate address.
Now check the configuration of the DIP switches (page 18).
3.1.2 Windows 2000
CDROM versionThe following installation routine applies to the ADwin CDROM version from
3.00.2360 onward. Install your ADwin board, ADwin-light board or your
ADlink-PC-ISA board into the PC only after you are requested to do so.
Call the hardware wizard under the Windows start menu: Settings Con-
trol panel System Hardware Hardware wizard.
Continue according to the wizard instructions:
Start Hardware wizard
Next
To Next Page
Loading...