EasyManua.ls Logo

Jäger ADwin - User Manual

Jäger ADwin
69 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ADwin Installation
Manual for the
Installation
of ADwin Systems
ISA
PCI
PCMCIA
USB
Ethernet
ADwin Installation, manual version 2.1, December 2005
Question and Answer IconNeed help?

Do you have a question about the Jäger ADwin and is the answer not in the manual?

Summary

Typographical Conventions

1 Information about this manual

Order of installation

Details on the sequence of installation steps for the ADwin system.

Qualified personnel

Defines who is authorized to perform programming and operation of ADwin systems.

2 Installation of the ADwin CDROM

System requirements

Details the necessary hardware and software for installing the ADwin CDROM.

Installation

Steps for installing the ADwin software packages from the CDROM.

3 ADwin ISA link interface

I;O address assignment

Explains the assignment of I/O registers and base addresses for ISA systems.

3.1 Installation of software and configuration of the PC

Guides through software installation and PC configuration for ISA link adapters.

3.2 Setting the DIP switches

Describes how to set the base address using DIP switches on ISA interface cards.

4 ADlink PCI adapter

System requirements

Lists the prerequisites for installing the ADlink PCI adapter.

Installation of the ADlink PCI adapter

Steps for physically installing the ADlink PCI adapter into the PC.

Installation of the drivers

Guides the installation of drivers for the ADlink PCI adapter.

5 ADpcmcia adapter

System requirements

Lists the prerequisites for operating with the ADpcmcia adapter.

5.1 Initialization of the drivers

Guides the installation of drivers for the ADpcmcia adapter.

ADconfig

Instructions for configuring the ADpcmcia adapter using ADconfig.

6 ADwin-light-16 system with USB interface

System requirements

Lists the prerequisites for installing the ADwin-light-16 system with USB.

Installation of the hardware

Instructions for physically installing the ADwin-light-16 hardware.

Driver installation from standard directory

Instructions for installing ADwin-light-16 USB drivers from the default directory.

7 ADwin-Gold system with USB interface

System requirements

Lists the prerequisites for installing the ADwin-Gold system with USB.

Installation of the USB linkadapter

Steps for installing the USB link adapter for ADwin-Gold.

Installation of the drivers

Guides the installation of drivers for the ADwin-Gold USB system.

8 ADwin-Pro module with USB interface

System requirements

Lists the prerequisites for installing the ADwin-Pro module with USB.

Installation of the Pro-USB module

Steps for physically installing the ADwin-Pro USB module.

Installation of the drivers

Guides the installation of drivers for the ADwin-Pro USB module.

9 ADwin System with Ethernet Interface

System requirements

Lists the prerequisites for using ADwin systems with an Ethernet interface.

Basic information about Ethernet operation

Introduces fundamental concepts for ADwin Ethernet interface configuration.

Configure Ethernet Interface

Steps to configure the ADwin Ethernet interface settings.

Annex

A.1 List of Abbreviations

Provides an alphabetical list of abbreviations used in the manual.

Jäger ADwin Specifications

General IconGeneral
ManufacturerJäger Computergesteuerte Messtechnik GmbH
TypeADwin
InterfacesEthernet
Analog inputsADwin-Gold: Up to 64, ADwin-Pro: Up to 64, ADwin-Light: Up to 32
Analog outputsADwin-Gold: Up to 32, ADwin-Pro: Up to 32, ADwin-Light: Up to 16
Digital inputsADwin-Gold: Up to 64, ADwin-Pro: Up to 64, ADwin-Light: Up to 32
Digital outputsADwin-Gold: Up to 64, ADwin-Pro: Up to 64, ADwin-Light: Up to 32