ADwin Installation, manual version 2.1, December 2005 13
ADwin ISA link interface
ADwin
3.1.3 Windows XP
ADwin-CD VersionThe following installation routine applies to the ADwin CDROM version from
3.20.0101 onward. Install your ADwin board, ADwin-light board or your
ADlink-PC-ISA board into the PC only after you are requested to do so.
Start the hardware wizard as follows: Call the control panel (for instance via the
XP start menu: Control Panel). Switch to the display "Classic View",
select "System" and start the hardware wizard under the tab "Hardware".
Continue according to the following instructions:
Add hardware wizard
Next