Jain Technology XONIC 100L - Totalizer Mode

Xonic 100L, 2021
23
Totalizer Mode User can select totalizer mode.
If positive flow is 100 and negative flow is 10, then total is 90
POSITIVE TOTAL means flowmeter will only totalize positive flow. If
positive flow is 100 and negative flow is 10, then total is 100.
NEGATIVE TOTAL means flowmeter will only totalizer negative flow.
If positive flow is 100 and negative flow is 10, then total is 10.
1 . FLOW VOLUME UNIT
2 . FLOW TIME UNIT
3 . FLOW RESOLUTION
4 . FLOW SCALE
5 . TOTAL VOLUME UNIT
6 . TOTAL RESOLUTION
7 . TOTAL SCALE
8 . BATCH TOTAL
9 . TOTALIZER MODE
Vol Unit : m³
_. _ _ _ _ _ _
FLOW
BATCH TOTAL
1 . FLOW VOLUME UNIT
2 . FLOW TIME UNIT
3 . FLOW RESOLUTION
4 . FLOW SCALE
5 . TOTAL VOLUME UNIT
6 . TOTAL RESOLUTION
7 . TOTAL SCALE 1 . NET TOTAL
8 . BATCH TOTAL 2 . POSITIVE TOTAL
9 . TOTALIZER MODE 3 . NEGATIVE TOTAL
FLOW
TOTALIZER MODE