Jain Technology XONIC 100L - Section 2. CH SELECT; Channel Selection

Xonic 100L, 2021
8
Section 2. CH SELECT
User should select channel first to setup the data in other menus.
In case of single channel, select CHANNEL 1.
In case of dual channel, user have to setup the data of each channel separately.
MAIN MENU
1 . GENERAL
2 . CH SELECT
3 . PIPE
4 . LIQUID
5 . INSTALL
6 . OPERATE
7 . FLOW
8 . IN/OUTPUT
9 . DATALOG 1 . CHANNEL 1
0 . DIAG 2 . CHANNEL 2
CH SELECT