Janam XT3 - Camera Controls Overview

1 Timer control. Tap to cycle through off/3/10 seconds.
2. Toggles between framing grid overlay on and off.
3. HDR (High Dynamic Range). Tap to toggle HDR on/off.
4.
Shutter Release
5.
Flash for rear camera. Tap to cycle on/auto/off. In video mode, it turns LED light on/off.
6. Camera selection. Tap to toggle between front and rear camera.
7. Swipe right to bring up
camera or video selection, and Settings.
8. Touch wherever you want the camera to focus.
9. When set to manual, this allows for
Exposure Compensation (-2 to +2 in 0.5 increments).
10. Swipe left to bring up the
Gallery app for photo editing.
Camera XT3 User Manual
Janam Technologies LLC Version 1, March 2020 Camera 6—2
Camera Controls Overview
1
1
2
2
3
3
4
4
5
5
6
7
8
67
8
9
Front camera location Rear camera location (if equipped)
Camera controls in portrait mode
Camera controls in landscape mode
All of the XT3 camera controls are lo-
cated onscreen. The camera can be
used both in portrait or in landscape
orientation.
10
10