TheChooserwindow Usingthedetailedpanels
Position
The detailed Position panel provides a larger version of the position target panel.
You’ll notice that ust just the pan or just the tilt by
using the Pan and Tilt sliders located on
panel.
on this panel you can also adj
the bottom and left side of the target
Finemode
Position, can be difficult to control when the
palette is in normal mode. To switch to fin
mode click the ‘Fine button’.
Flip
e
Click this button to rotate and invert the
Customvalues
Some fixtures have effects and other special
features that can be used by setting a
channel to a particular value. These features
vary from fixture to fixture so they aren’t
included in Vista’s ‘generic’ controls.
See About Custom values on page 5-35 for
more details on using the custom control
panels.
Colour
The detailed Colour palette let’s you choose how to control the colour mixing
mechanism and the colour wheel(s) in your fixtures:
fixture(s) so that it is pointing at the same
position.
VistaUserGuide,Version2 5‐27
To Next Page
Loading...
Need help?
General
