TheChooserwindow Usingthedetailedpanels
Customvalues
Some fixtures hav f a
channel to a particula
aren’t included in Vis
See About Custom value
panels.
Gobo
The detailed Gobo pa so
you can see exactly w d where they are on the wheel:
e e fects and other special features that can be used by setting
r value. These features vary from fixture to fixture so they
ta’s ‘generic’ controls.
s on page 5-35 for more details on using the custom control
nel provides a graphic representation of the gobo wheel
hat patterns are available an
If a fixture has more than one gobo wheel
the buttons above the gobo wheel will be
available. To choose the wheel you want to
work with click on the corresponding
button.
move the gobo wheel by small
increments, to create split patterns, by
clicking on the Wheel and Index button and
adjusting the slider to turn the wheel
forwards or backwards.
You can also rotate or spin the wheel by
clicking on the Wheel and Rotate buttons
and adjusting the slider to spin the wheel
forwards or backwards. If the colour wheel
is spinning you can reverse the spin
direction by clicking on the [Reverse Icon]
or stop it by clicking on the [Stop icon]
Rotation
You can
To Next Page
Loading...
Need help?
General
