Jandy AquaPure APURE700 User Manual

Installation and Operation Data
H0282600B
Jandy
®
AquaPure
™
Electronic Chlorine
Generator
APURE700 and APURE1400
Patent Pending
Installation and
Operation Manual
WARNING
FOR YOUR SAFETY - This product must be installed and serviced by a pro fes sion al pool/spa
service technician. The procedures in this manual must be followed ex act ly. Failure to follow
warning notices and instructions may result in property damage, serious injury, or death.

Jandy AquaPure APURE700 Specifications

General

Brand	Jandy
Model	AquaPure APURE700
Category	Water Filtration Systems
Language	English

Summary

Section 1. Safety Information

Section 2. System Description

2.1 Electrical Specifications

Details electrical requirements, circuit protection, and specifications for APURE700/1400.

Section 3. Installation Instructions Model APURE700 and APURE1400

3.1 Materials and Tools

3.2 Plumbing Configurations

Illustrates recommended ways to plumb the AquaPure cell and sensor.

3.3 Installing APURE700 and APURE1400 Control Center

3.4 Earth Bonding (Grounding)

Explains the importance and procedure for grounding the AquaPure system.

3.5 Installing the APURE700 and APURE1400 Cell and Flow/Temp/Salinity Sensor

Guide for mounting the electrolytic cell and the flow/temp/salinity sensor.

Section 4. Pool Water Preparation

4.4 Chemistry You Need to Know

Explains essential pool water chemistry parameters for optimal AquaPure performance.

4.5 Optimum Pool Water Conditions

4.7.3 How Much Salt to Use?

Section 5. Operating Instructions

5.1 Using the Front Panel Controls

Explains how to adjust chlorine production, check salinity, and use boost mode.

5.2 Reading the Display

5.4 Startup

Section 6. User Maintenance Instructions

6.4 Electrolytic Cell Cleaning - As Needed

Procedures for automatic and manual (acid wash) cleaning of the electrolytic cell.

6.6 Winterizing

Section 7. Troubleshooting

7.1 Problems and Corrective Action

Lists common problems, their possible causes, and corrective actions.

7.2 Service Codes

Explains service codes displayed by the AquaPure to indicate specific issues.