To Next PageTo Next Page
Need help?Do you have a question about the Jandy APUREM and is the answer not in the manual?
General| Brand | Jandy |
|---|---|
| Model | APUREM |
| Category | Water Filtration Systems |
| Language | English |
Explains the electrolysis process and the system's components for chlorine generation.
Details electrical input and output specifications for the 700 and 1400 models.
Lists furnished installation materials and necessary tools for the setup process.
Provides diagrams and recommendations for cell and sensor orientation and plumbing.
Instructions for mounting the control/power center units to the installation surface.
Details grounding requirements for electrical safety and proper installation.
Instructions on how to configure the Power Interface Board for 700 or 1400 models.
Steps for installing the user interface onto an AquaLink bezel.
Detailed instructions for installing the cell and sensor assembly into the plumbing.
Wiring instructions for connecting the chlorinator to an AquaLink system.
How to control the chlorinator using an external ORP controller.
Methods for calculating pool volume in liters for accurate system sizing.
Methods for calculating pool volume in gallons for accurate system sizing.
Guidance on choosing the correct model based on pool size and usage.
Explains key water chemistry parameters like stabilizer, nitrates, and pH.
Recommended water balance conditions for optimal performance and equipment protection.
Procedures for testing chlorine levels at different pool locations.
Information on salt type, quantity, and how to add it to the pool.
Explains the functions of buttons on the control panel for adjustments.
Interpreting the various indicators and messages on the LCD display.
General guidance on system operation, pump run times, and chlorine levels.
Steps for initial system startup, including shocking and calibration.
Recommendations for operating the system during cold weather.
Lists do's and don'ts for operating and maintaining the system effectively.
Daily tasks including chlorine and pH testing.
Monthly tasks including salt, stabilizer, and metal testing.
Procedures for automatic and acid wash cleaning of the electrolytic cell.
Detailed steps for cleaning the cell with acid.
Instructions for cleaning the flow/temp/salinity sensor.
Steps to prepare the system for winter to prevent freeze damage.
Table listing common problems and their solutions.
Addresses issues with 'Cell On', 'No Flow' indicators.
Troubleshooting for 'Service' indicator and low salt levels.
Solutions for chlorine odor, cloudy water, and skin irritation.
Lists specific error codes and their possible causes and corrective actions.
Lists advanced service codes requiring professional help.
Explains letter codes like EC, Lo, bo, HH, JA, Jb.
Lists parts for the control/power center with diagrams.
Lists replacement parts for the 3-port cell with universal unions.
Lists replacement parts for the 3-port cell with 2" PVC unions.
