To Next PageTo Next Page
Need help?Do you have a question about the Jandy AquaPure and is the answer not in the manual?
General| Salinity Range | 2500-4500 ppm |
|---|---|
| Salt Level Range | 2500-4500 ppm |
| Type | Salt Water Chlorinator |
| Voltage | 120V or 240V |
| Flow Rate | 20-45 GPM |
| Water Temperature Range | 50°F |
Essential safety guidelines, warnings, and precautions for installation and operation of the equipment.
Procedure for establishing a proper earth ground connection to ensure electrical safety.
Detailed instructions for installing the electrolytic cell and flow/temp/salinity sensor assembly.
Instructions on when, what type, how much salt to use, and how to add it to the pool.
Steps for initial system startup, including water shocking and applying power.
Procedures for inspecting and cleaning the electrolytic cell and the flow/temp/salinity sensor.
Common operational problems, their potential causes, and recommended solutions.
List of service codes, their meanings, causes, and corrective actions.
