To Next PageTo Next Page
Need help?Do you have a question about the Jandy TruClear and is the answer not in the manual?
General| Type | Saltwater Chlorinator |
|---|---|
| Cell Material | Titanium |
| Pool Size Capacity | Up to 40, 000 gallons |
| Control Interface | Digital |
| Power Supply | 120/240 VAC |
| Installation | Inline plumbing installation |
| Salinity Range | 2500 - 4500 ppm |
| Plumbing Size | 2 inch |
Covers essential safety precautions for pool and spa use, electrical work, and equipment operation, emphasizing potential hazards.
Outlines mandatory placement and positioning requirements for the power pack (0.6m off ground, 1.5m/3m from pool) and cell (last equipment, 4.6m from power pack).
Step-by-step guide for mounting the power pack unit securely on a wall using provided templates and ensuring proper placement.
Instructions for plumbing the electrolytic cell into the pool's circulation system, covering standard and retrofitted installations and flow direction.
Details on safely connecting the power pack to the main power source, emphasizing GFCI protection, proper grounding, and conductor size.
Explains electrical bonding requirements for pool equipment, including the power pack, to ensure safety and code compliance per NEC/CEC.
Details recommended water balance parameters (pH, alkalinity, hardness, etc.) for optimal performance and cell longevity, referencing APSP standards.
A comprehensive guide to common problems encountered with the Jandy Pro Series and their corresponding corrective actions.
