Jandy SFTM22-1.5 User Manual

H0579200_REVD
WARNING
FOR YOUR SAFETY - This product must be installed and serviced by a contractor who is licensed and
qualified in pool equipment by the jurisdiction in which the product will be installed where such state
or local requirements exist. The maintainer must be a professional with sufficient experience in pool
equipment installation and maintenance so that all of the instructions in this manual can be followed
exactly. Improper installation and/or operation can create dangerous high pressure which can cause a
catastrophic product failure and/or cause the multiport valve to be blown off possibly causing death,
serious injury or property damage.
Before installing this product, read and follow all warning notices and instructions that accompany this
product. Failure to follow warning notices and instructions may result in death, serious injury or property
damage. Consult Zodiac customer service at 1-800-822-7933 for assistance. Improper installation and/or
operation will void the warranty.
ENGLISH | FRANÇES | ESPAÑOL
INSTALLATION AND
OPERATION MANUAL
Top Mount Sand Filter
Models SFTM22-1.5, SFTM24-2.0

Jandy SFTM22-1.5 Specifications

General

Model	SFTM22-1.5
Type	Sand Filter
Manufacturer	Jandy
Category	Water Filtration Systems
Filter Area	2.2 sq ft
Max Operating Pressure	50 PSI
Tank Material	Fiberglass
Filter Media	Sand
Valve Material	PVC
Inlet/Outlet Size	2"

Summary

Important Safety Instructions

Maximum Operating Pressure Warnings

Details critical warnings about exceeding 35 PSI and risks of pressurized air in the system.

Electrical Shock Hazard Precautions

Provides guidance to avoid electrical shock during maintenance and operation.

General Cautions for Operation

Highlights important cautions regarding pressure gauge, vacuum, and waste disposal.

Package Contents

SFTM22-1.5 Package Contents

Lists all parts included in the SFTM22-1.5 model package with quantities.

SFTM24-2.0 Package Contents

Lists all parts included in the SFTM24-2.0 model package with quantities.

Required Tools and Equipment

Essential Tools for Installation

Lists necessary tools and safety equipment required for filter installation.

Equipment Location

Equipment Pad Requirements

Details requirements for the equipment pad, including level ground and ventilation.

Filter Location Guidelines

Specifies optimal positioning for the filter on the equipment pad for servicing and efficiency.

Initial Setup

Install Base

Step-by-step instructions for installing the filter base onto the tank.

Install Hub and Laterals SFTM22-1.5

Guides the installation of the lateral hub assembly and laterals for the SFTM22-1.5 model.

Install Hub and Laterals SFTM24-2.0

Guides the installation of the lateral hub assembly and laterals for the SFTM24-2.0 model.

Fill With Sand

Provides instructions on how to properly add filter sand to the tank, including a warning.

Assemble Multiport Valve

Detailed steps for assembling the multiport valve, including pressure gauge installation.

Filter Sand Filling Procedure

Instructions for adding filter sand to the tank, including water addition and scoop technique.

PVC Cement and Pipe Dope Warning

Important warning regarding the safe use of PVC cement and pipe dope in plumbing.

Install Multiport Valve

Instructions for securely attaching the multiport valve to the filter tank.

Plumbing Connections

Covers plumbing connections, pipe sizing recommendations, and material usage for unions.

Operation

Initial Start Up Procedure

Detailed steps for the initial startup of the filter, including backwashing and rinsing.

Operating Pressure and Safety

Covers operating pressure limits, monitoring, and critical safety warnings during operation.

Filter Sand Maintenance

Changing the Filter Sand

Instructions for removing and replacing the filter sand, including disposal warning.

Winterizing Procedures

Steps to prepare the filter for winter, including draining and protecting the system.

Dimensions and Replacement Parts

Approximate Dimensions

Provides key physical dimensions for the SFTM22-1.5 and SFTM24-2.0 models.

SFTM22-1.5 Replacement Parts

Lists part numbers and descriptions for replacement components of the SFTM22-1.5 model.

SFTM24-2.0 Replacement Parts

Lists part numbers and descriptions for replacement components of the SFTM24-2.0 model.