Page 18
ENGLISH
Jandy
®
Pro Series TruClear
™
Chlorine Generating System
|
Installation & Operation Manual
Current
Salt
Level
ppm
Pool/Spa Size - US Gallons (Litres)
10,000 gal 15,000 gal 20,000 gal 25,000 gal 30,000 gal 35,000 gal
(38,000 L) (57,000 L) (76,000 L) (95,000 L) (114,000 L) (132,000 L)
0 250 lbs (114 kgs) 376 lbs (170 kgs) 501 lbs (227 kgs) 626 lbs (284 kgs) 751 lbs (341 kgs) 876 lbs (397 kgs)
250 229 lbs (104 kgs) 344 lbs (156 kgs) 459 lbs (208 kgs) 574 lbs (260 kgs) 688 lbs (312 kgs) 803 lbs (364 kgs)
500 209 lbs (95 kgs) 313 lbs (142 kgs) 417 lbs (189 kgs) 522 lbs (237 kgs) 626 lbs (284 kgs) 730 lbs (331 kgs)
750 188 lbs (85 kgs) 282 lbs (128 kgs) 376 lbs (170 kgs) 469 lbs (213 kgs) 563 lbs (256 kgs) 657 lbs (298 kgs)
1000 167 lbs (76 kgs) 250 lbs (114 kgs) 334 lbs (151 kgs) 417 lbs (189 kgs) 501 lbs (227 kgs) 584 lbs (265 kgs)
1250 146 lbs (66 kgs) 219 lbs (99 kgs) 292 lbs (132 kgs) 365 lbs (166 kgs) 438 lbs (199 kgs) 511 lbs (232 kgs)
1500 125 lbs (57 kgs) 188 lbs (85 kgs) 250 lbs (114 kgs) 313 lbs (142 kgs) 376 lbs (170 kgs) 438 lbs (199 kgs)
1750 104 lbs (47 kgs) 156 lbs (71 kgs) 209 lbs (95 kgs) 261 lbs (118 kgs) 313 lbs (142 kgs) 365 lbs (166 kgs)
2000 83 lbs (38 kgs) 125 lbs (57 kgs) 167 lbs (76 kgs) 209 lbs (95 kgs) 250 lbs (114 kgs) 292 lbs (132 kgs)
2250 63 lbs (28 kgs) 94 lbs (43 kgs) 125 lbs (57 kgs) 156 lbs (71 kgs) 188 lbs (85 kgs) 219 lbs (99 kgs)
2500 42 lbs (19 kgs) 63 lbs (28 kgs) 83 lbs (38 kgs) 104 lbs (47 kgs) 125 lbs (57 kgs) 146 lbs (66 kgs)
2750 21 lbs (9 kgs) 31 lbs (14 kgs) 42 lbs (19 kgs) 52 lbs (24 kgs) 63 lbs (28 kgs) 73 lbs (33 kgs)
3000 Optimum Optimum Optimum Optimum Optimum Optimum
NOTE For a new pool or newly resurfaced pool it is recommended to wait at least 30 days (surface should be completely cured)
before adding salt. Follow the pool surface manufacturers guidelines for your particular pool. For vinyl and fiberglass pools,
salt can be added at start up.
Table 1. Approximate Pounds and Kilograms of Salt Needed to Obtain 3.0 gpl (3,000 ppm)
Table 2. Approximate Pounds and Kilograms of Stabilizer Needed to Obtain 50 ppm
Current
Cyanuric Acid
Level - ppm
Pool/Spa Size US Gallons (Litres)
10,000 gal (38,000 L ) 15,000 gal (57,000 L) 20,000 gal (76,000 L ) 25,000 gal (95,000 L ) 30,000 gal (114,000 L) 35,000 gal (132,000 L )
0 (4.2 lbs) 1.9 kgs (6.3 lbs) 2.9 kgs (8.4 lbs) 3.8 kgs (10.5 lbs) 4.8 kgs (12.6 lbs) 5.7 kgs (14.8 lbs) 6.7 kgs
10 (3.4 lbs) 1.5 kgs (5.1 lbs) 2.3 kgs (6.7 lbs) 3.1 kgs (8.4 lbs) 3.8 kgs (10.1 lbs) 4.6 kgs (11.8 lbs) 5.4 kgs
20 (2.5 lbs) 1.1 kgs (3.8 lbs) 1.7 kgs (5.1 lbs) 2.3 kgs (6.3 lbs) 2.9 kgs (7.6 lbs) 3.4 kgs (8.9 lbs) 4.0 kgs
30 (1.7 lbs) 0.8 kgs (2.5 lbs) 1.2 kgs (3.4 lbs) 1.5 kgs (4.2 lbs) 1.9 kgs (5.1 lbs) 2.3 kgs (5.9 lbs) 2.7 kgs
40 (0.8 lbs) 0.4 kgs (1.3 lbs) 0.6 kgs (1.7 lbs) 0.8 kgs (2.1 lbs) 1.0 kgs (2.5 lbs) 1.2 kgs (3.0 lbs) 1.3 kgs
NOTE
For indoor pools, it is not necessary to add chlorine stabilizer to the swimming pool water.
How to Add Salt to the Pool
1. Turn on pump to circulate pool water.
2. IMPORTANT - Turn the power pack off by pressing and holding the ON/Off button for 6 seconds.
3. Test the water for salinity level using test strips, electronic meter, or by your local pool professional.
4. Use the Table 1 to determine the amount of salt to add. Be conservative when adding salt as it is easier to add
more if needed than it is to dilute if there is too much salt.
5. Disperse salt into pool. Do not add through skimmer, main drain, or surge tank. Brush the salt around the pool to
facilitate dissolving. Circulate lter system for 24 hours to ensure even distribution.
6. After 48-72 hours, verify correct salt reading by testing the water salinity level using test strips, electronic meter,
or by your local pool professional.
7. When the salinity level is correct, turn the power pack on. Press the
buttons to set the desired production rate.
To Next Page
Loading...
Need help?
General
