To Next PageTo Next Page
Need help?Do you have a question about the Jandy pool/spa heater and is the answer not in the manual?
General| Brand | Jandy |
|---|---|
| Model | pool/spa heater |
| Category | Swimming Pool Heater |
| Language | English |
Provides an overview of the LX and LT pool/spa heaters and manual content.
Details the features and certifications of Laars LX and LT heaters.
Outlines the limited factory warranty and registration process.
Lists essential requirements for safe and satisfactory gas-fired pool heater operation.
Highlights specific installation rules for LP gas and safety warnings.
Details field preparation and assembly for heater installation.
Discusses considerations for indoor/outdoor installation and water leakage.
Specifies minimum clearances from combustible surfaces for safe installation.
Provides guidelines for installing the heater on various flooring types.
Covers placement guidelines for outdoor heater installations, including safety clearances.
Details requirements for installing heaters in outdoor shelters in Canada.
Explains how to convert the heater for indoor installation with vent collar.
Specifies minimum platform height for garage installations due to combustible fumes.
Details requirements for providing adequate combustion and ventilation air.
Explains vent pipe sizing based on heater model and codes for safe venting.
Covers vent pipe sizing, installation, and code compliance for Category I appliances.
Provides general guidelines for gas supply and piping installation.
Provides general guidelines for gas supply and piping installation.
Details safety precautions for installing heaters using LP gas.
Explains wiring connections, grounding, and conversion between 120V and 240V.
Explains wiring connections, grounding, and conversion between 120V and 240V.
Covers requirements for bonding metallic components of the pool structure to the heater.
Provides instructions for wiring a time clock auxiliary switch for pump operation.
Details how to wire the Laars LX heater for remote operation with RS Control Systems.
Illustrates typical piping for pool/spa combinations and addresses back-siphoning.
Explains the procedure for reversing water connections for left-side access.
Illustrates typical piping for pool/spa combinations and addresses back-siphoning.
Describes how to connect PVC or CPVC pipe to the heater's water header.
Details the installation procedure for a mandatory pressure relief valve.
Warns about chemical damage and provides installation guidelines for chlorinators.
Explains the normal operation sequence and diagnostic capabilities of the heater.
Explains the normal operation sequence and diagnostic capabilities of the heater.
Guides through the initial start-up procedure and checks for proper water flow.
Details how to check and adjust gas supply and manifold pressures for correct operation.
Explains how to adjust the pressure switch for proper heater operation with variable pump speeds.
Describes how to measure and adjust water temperature rise for optimal performance.
Details the steps for initial start-up, including cleaning the water and setting controls.
Explains the information displayed on the LX and LT control panels and indicators.
Explains the information displayed on the LX and LT control panels and indicators.
Provides instructions for turning the heater on, off, and using RS control systems.
Guides on setting temperatures, switching units, and using the temperature lock.
Describes how the heater displays error codes and potential causes.
Provides step-by-step instructions for safely lighting the heater.
Provides step-by-step instructions for safely lighting the heater.
Details the procedure for completely shutting down the heater.
Discusses mineral content and pH guidelines for swimming pool water.
Discusses mineral content and pH guidelines for swimming pool water.
Covers critical chemical balance for spa water and its impact on the heater.
Explains the importance of regular water changes and chemical monitoring in spas.
Recommends frequency for changing spa water and stabilizing chemistry.
Lists factors that increase corrosive action of pool/spa water on the heater.
Recommends test kits for pool/spa owners and professional testing.
Presents safety rules for hot tub use, including temperature limits and health precautions.
Offers tips to conserve fuel and reduce operating costs for pool heaters.
Provides guidance for pool operation during transitional seasons with thermostat settings.
Provides guidance for pool operation during transitional seasons with thermostat settings.
Details steps for protecting the heater during winter from freezing temperatures.
Outlines basic guidelines for owners to inspect the heater for debris and safety.
Outlines basic guidelines for owners to inspect the heater for debris and safety.
Lists safety checks required for annual professional inspection and servicing.
Provides general information on heater design certifications and fuel types.
Lists key specifications including certifications, power requirements, and working pressure.
Presents physical dimensions, input ratings, and shipping weights for models.
Explains how to order or purchase replacement parts from dealers or Water Pik Technologies.
Lists part numbers organized by component category for easy ordering.
Provides a general exploded view of the heater components for identification.
Provides a general exploded view of the heater components for identification.
Offers a detailed exploded view of specific heater components for reference.
Provides instructions for submitting warranty claims, including required information.
