To Next PageTo Next Page
Need help?Do you have a question about the Jandy HI-E2 and is the answer not in the manual?
General| Model | HI-E2 |
|---|---|
| Category | Swimming Pool Heater |
| Efficiency | 95% |
| Fuel Type | Natural Gas or Propane |
| Minimum Flow Rate | 30 GPM |
| Maximum Working Pressure | 50 PSI |
| Water Connections | 2 in. |
| Ignition | Electronic |
Overview of the manual's purpose and scope for the Jandy Pro Series Hi-E2 heater.
Details the features, efficiency, and technical specifications of the Hi-E2 gas-fired pool and spa heater.
Outlines the terms and conditions of the manufacturer's limited factory warranty for the Hi-E2 heater.
Crucial safety precautions and warnings regarding installation, operation, and potential hazards like carbon monoxide.
Fundamental rules for safe and correct installation of gas-fired pool heaters, including codes and standards.
Guidelines for selecting a safe and appropriate installation site for the heater.
Specifies the minimum required clearances between the heater and combustible materials.
Specific requirements and considerations for installing the Hi-E2 heater outdoors.
Requirements for installing the Hi-E2 heater indoors, including air and venting provisions.
Details necessary for providing adequate combustion air for one-pipe indoor installations.
Procedures for managing condensate water produced by the heater, including trap installation.
Instructions for connecting the gas supply and proper piping practices, including safety precautions.
Guidelines for safe and correct electrical connections to the heater, including bonding requirements.
Instructions for connecting the Hi-E2 heater to the pool/spa water system and pipe reversal.
Steps for initial startup, system checks, and adjustments after installation.
Step-by-step guide for safely starting the heater for the first time, including pre-operation checks.
Explanation of how to set and use the heater's dual temperature controls for pool and spa.
Procedures for safely lighting the burner and shutting down the heater.
Guidelines for maintaining proper pool and spa water chemical balance for optimal heater performance.
Critical safety guidelines for users of spas and hot tubs to prevent injury or health risks.
Instructions for preparing the heater for seasonal use, storage, and winterization.
Recommended checks for owners to perform regularly to ensure proper heater operation and safety.
Overview of service procedures, owner checks, and system interactions before calling a technician.
Description of the heater's advanced combustion system, its components, and operation.
Explanation of key components like gas valve, blower, and igniter and how they function.
Instructions for inspecting, cleaning, and replacing the combustion air filter.
Detailed guide for diagnosing electrical issues using a voltmeter and wiring diagrams.
Procedures for checking and diagnosing airflow and gas flow issues using pressure measurements.
Information on handling, maintaining, and troubleshooting the condensate disposal system.
Guidance on replacing key internal components like the heat exchanger and burner assembly.
Provides technical specifications, certifications, and operational limits for the Hi-E2 heater.
Instructions on how and where to order replacement parts for the Hi-E2 heater.
A comprehensive list of available replacement parts with key numbers and order part numbers.
A visual diagram showing the assembly of heater components for part identification.
