janitza UMG 804 - Page 15

15
125mm (5”)
7.5 mm
min.
35 mm
min. width
35 mm
DIN Rail
DIN Circlips
Unlock
Lock
125mm (5”)
7.5 mm
min.
35 mm
min. width
35 mm
DIN Rail
DIN Circlips
Unlock
Lock
DANGER
Disconnect power to the panel or
equipment on which the monitor is
being installed before starting the
installation.
DANGER
Débranchez l’alimentation du pan-
neau ou de l’équipement sur lequel le
moniteur est en cours d’installation
avant de commencer l’installation.
125mm (5”)
7.5 mm
min.
35 mm
min. width
35 mm
DIN Rail
DIN Circlips
Unlock
Lock
Fig.: UMG 804 Installation
The UMG 804 can be housed in
existing enclosures where permitted
by code or inside standard electrical
enclosures.
The UMG 804 is installed by mount-
ing on standard 35mm DIN rail
(DIN EN 60715). The enclosure can be
mounted in any orientation. Secure the
DIN rail using a mechanical fastener
such as sheet metal screw or bolt to a
secure surface.
The device is installed in switching
cabinets or in small installation dis-
tributors in accordance with DIN 43880
on a 35 mm mounting rail. It can be
mounted in any position.