To Next PageTo Next Page
Need help?Do you have a question about the janitza UMG 96S and is the answer not in the manual?
General| Device type | Power Quality Analyzer |
|---|---|
| Digital inputs/outputs | 2 digital inputs, 2 digital outputs |
| Operating Temperature | -10 °C to +55 °C |
| Storage Temperature | -20 °C to +70 °C |
| Dimensions | 96 x 96 x 77 mm |
| Weight | Approx. 500 g |
| Power Measurement | Active, reactive, and apparent power |
| Frequency Measurement | 45 Hz to 65 Hz |
| Harmonics Measurement | Yes |
| Communication Interfaces | Ethernet, RS-485 |
| Display | LCD |
| Measurement Category | CAT III |
| Mounting | Panel mounting |
| Energy Measurement | Active, Reactive, Apparent Energy (Import/Export) |
| Installation Type | Panel Mounting |
Instructions for physically installing the device and connecting voltage inputs.
Details on configurable digital and analog inputs/outputs.
Steps for initial device setup and connecting measurement inputs.
Overview of device parameters and how measured values are accessed.
Instructions for programming current and voltage transformer ratios.
Details on accessing device data and functions using the MODBUS RTU protocol.
Technical specifications and connection guidelines for the RS232 interface.
Information on RS485 bus termination, shielding, and cable length.
Information on Profibus DP connectivity, participants, and GSD files.
Guides on identifying, interpreting, and resolving error conditions.
