Page 6
Service
If you have problems, which are not described
in this manual, please ask our technical support.
For further handling of your questions, please
have the following on hand:
- Device description (see type plate),
- Serial number (see type plate),
- Software Release,
- Measurement and auxiliary voltage and
- Exact description of the problem.
You can contact us:
Monday to Thursday
between 07:00h and 15:00h
and Friday
between 07:00h and 12:00h
Janitza electronic GmbH
Vor dem Polstück 1
D-35633 Lahnau
Support: Tel. (0 64 41) 9642-22
Fax (0 64 41) 9642-30
e-mail: info@janitza.de
Hints for maintenance
Before delivery the device is tested in various
safety checks and marked with a seal. If the
device is opened, these checks must be re-
peated.
There is no guarantee for devices, which are
opened out of the manufacturing works.
Repairing and calibration
Maintenance and calibration can only be carried
out at manufacturer's end.
Face plate
The cleaning of the front foil must be done with
a soft cloth using a common cleansing agent.
Acid or acidic agents may not be used for clean-
ing.
Battery
On the additional PCB 1 (option), there is a
Lithium battery. The life expectance of the bat-
tery at storage temperature +45°C is a minimum
of 5 years. The typical life expectance is
between 8 and 10 years.
If the battery voltage is too low after net return,
the display shows the warning "Err 320".
For safety reasons, the battery should be ex-
changed in the manufacturing works only!
Waste management
The UMG96S can be disposed and recycled as
electronical waste according to the legal regula-
tions. Please note, that the input Lithium battery
must be disposed separately.
To Next Page
Loading...
Need help?
General
