Page 91
Declaration of conformity
UMG96S fulfills the protection requirements of standard 89/336/EWG in connection to DIN EN
61326 (2002-03) as well as of standard 73/23EWG and 93/68/EWG in connection to EN 61010-1
(2002-08).
Safety regulations
: EN61010-1 08:2002, IEC 61010-1:2001
Requirements of electromagnetical compatibility
: DIN EN61326:2002-03
Noise emission
Basic unit : DIN EN61326:2002-03, table 4 class B, (residential areas)
Basic unit with option 1 : DIN EN61326:2002-03, table 4 class B, (residential areas)
Basic unit with option 2 : DIN EN61326:2002-03, table 4 class A, (industrial areas)
Noise immunity (industrial areas)
Casing : Electrostatic discharge immunity test, IEC61000-4-2 (4kV/8kV)
: Electromagnetically fields, IEC61000-4-3 (10V/m)
Voltage and supply : Voltage dips, IEC61000-4-11 (0,5Periode)
: Electrical fast transient/burst, IEC61000-4-4 (2kV)
: Surge immunity test, IEC61000-4-5 (1kV)
: Immunity to conducted disturbances, IEC61000-4-6 (3V)
Input/output, serial interfaces
: Electrical fast transient/burst, IEC61000-4-4 (1kV)
: Surge immunity test, IEC61000-4-5 (1kV)
To Next Page
Loading...
Need help?
General
