To Next PageTo Next Page
Need help?Do you have a question about the janitza UMG 96 RM-E and is the answer not in the manual?
General| Device Type | Power Quality Analyzer |
|---|---|
| Mounting | Panel Mount |
| Measurement Category | CAT III 600 V |
| Power Measurement | Active, Reactive, Apparent Power |
| Operating Temperature | -10 °C to +55 °C |
| Storage Temperature | -20 °C to +70 °C |
| Voltage Measurement | Up to 600 V |
| Frequency Measurement | 45...65Hz |
| Energy Measurement | Active, reactive, apparent energy |
| Harmonics Analysis | THD, individual harmonics |
| Communication Interfaces | RS-485, Ethernet |
| Display | LCD |
| Accuracy Class | 0.5 |
| Protection Class | IP20 |
| Power Supply | 85...265V AC/DC |
| Weight | Approx. 600g |
Explains the meaning of pictograms used in the manual for safety.
Describes the intended application and limitations of the UMG 96RM-E.
Details correct vertical installation and required clearances for ventilation.
Instructions for connecting the device's power supply, including safety precautions.
Explains how to connect and measure voltages in different network types.
Explains how to connect current transformers for measurements on inputs I1 through I4.
Explains how to perform residual current monitoring using inputs I5 and I6.
Details the RS485 interface for Modbus RTU communication.
Instructions for configuring and connecting the device via Ethernet.
How to access and change device settings via the programming menu.
Covers essential settings like transformer ratios and network parameters.
Details on setting up network parameters like IP address, subnet mask, and gateway.
Explanation of how mean values are calculated and averaging methods.
Information about the device's active, reactive, and apparent energy meters.
Explanation of harmonic analysis and their detection up to the 40th order.
Instructions for connecting current transformers and measuring AC currents.
How to connect residual current transformers and measure residual currents.
Setting up comparators and monitoring threshold values for device control.
Description of different error and warning messages displayed by the device.
Troubleshooting guide for common faults, their causes, and remedies.
Basic technical data including weight, battery, and lighting service life.
Table detailing all function parameters, their symbols, precision, and ranges.
List of parameters with their addresses, formats, and default values.
Detailed wiring diagram for connecting residual current measurement.
Quick guide to adjusting current transformers and viewing measured values.
Quick guide for setting up TCP/IP addressing manually or dynamically.
