Content
General 4
Inspection on receipt 6
Available accessories 7
Product description 8
Proper use 8
Performance characteristics – UMG 96RM-E 10
Measuring process 11
Operating concept 11
GridVis network analysis software 11
Connection variants 12
Mounting 13
Installation 15
Power supply 15
Measuring voltage 16
Current measurement via I1 to I4 22
Residual current measurement (RCM) via I5, I6 31
Temperature measurement input 35
RS485 interface 36
Ethernet interface 39
Digital in-/outputs 40
LED status bar 45
Operation 46
Display mode 46
Programming mode 46
Parameters and measured values 48
Configuration 50
Connecting the supply voltage 50
Current and voltage transformers 50
Programming the current transformer for I1 to I3 52
Programming the voltage transformer 53
Programming parameters 54
TCP/IP configuration 55
RS485 device address (Addr. 000) 58
RS485 baud rate (Addr. 001) 58
MODBUS gateway (Addr. 002) 59
User password (Addr. 050) 59
Parameter 60
Mean value 60
Averaging method 60
Min. and max. values 60
Mains frequency (Addr. 034) 61
Energy meter 62
Reset energy meter (Addr. 507) 62
Harmonics 63
Measured value rotation 64
Measured value indocations 64
Phase sequence 66
LCD contrast (Addr. 035) 66
Backlight 66
Time recording 67
To Next Page
Loading...
Need help?
General
