janitza UMG 96 RM-E - Impulse Output

80
UMG 96RM-E
Impulse output
The digital outputs can be used for the output
of pulses for the computation of power consumption.
For this purpose, a pulse of defined length is applied
on the output after reaching a certain, adjustable amount
of power.
You need to make various adjustments in the software
GridVis (configuration menu) to use a digital output as
a pulse one.
• Digital output,
• Selection of source,
• Selection of measured value,
• Pulse length,
• Pulse value.
Fig.: Software GridVis, configuration menu