Need help?Do you have a question about the janitza UMG 804 and is the answer not in the manual?
General| Device Type | Power Quality Analyzer |
|---|---|
| Power Measurement | Active, reactive, apparent power |
| Communication Interfaces | Ethernet, RS485 |
| Operating Temperature | -10°C to +55°C |
| Current Measurement | 1/5 A |
| Energy Measurement | Active, reactive, apparent energy |
| Frequency Measurement | 45 to 65 Hz |
| Harmonics Measurement | Up to 63rd harmonic |
| Display | Color graphical display |
| Protocols | Modbus TCP, Modbus RTU |
| Measurement Category | CAT III 300 V |
| Power Supply | 100-240 V AC, 50/60 Hz |
Information on the user manual, feedback channels, and proper disposal procedures for the device.
Covers safety instructions, hazard warnings (DANGER, WARNING, CAUTION), and qualifications for personnel.
Details the UMG 804 system, ordering options, and comprehensive technical specifications for the device.
Lists the device's standard and enhanced features, along with electrical parameters that can be monitored.
Guides on physical installation, DIN rail mounting, and connecting interface cards using network cables.
Details DIN Rail CT Interface Boards and panel map configurations for mapping circuits to terminals.
Covers voltage input connections, wiring configurations, and serial/Ethernet communication setup.
Explains configuring the UMG 804 via USB, homepage, Modbus, and key settings like General, CT Size, Breaker Size.
Accessing the web interface, viewing device status, firmware version, and port connectivity.
Explains how to access and interpret meter data, detail data, digital I/O, waveform captures, and voltage events.
Details configuring True Meters, Virtual Meters, and system settings including firmware updates.
Guides on saving and loading configuration files, and updating the device firmware via USB or network.
Provides steps to resolve network issues, confirm IP addresses, and modify subnet and IP configurations.
To Next Page
