45
UMG 96RM-E
LED status bar
The different statuses of the inputs and outputs are
displayed via the LED status bar on the rear of the device.
Digital inputs
The LED assigned to a respective input lights up green
when a signal of at least 1mA fl ows on this interface.
Digital outputs
The LED assigned to a respective output lights up red
when the output is set as enabled - regardless of whether
there is a continuing connection to this interface.
Digital in-/output 1
Digital in-/output 2
Digital in-/output 3
LED status bar
Fig. LED status bar for inputs
and outputs
To Next Page
Loading...
