To Next PageTo Next Page
Need help?Do you have a question about the janitza UMG 96 RM-PN and is the answer not in the manual?
General| Mounting | Panel Mount |
|---|---|
| Display | LCD |
| Measurement Category | CAT III 600V |
| Communication | Ethernet |
| Power Measurement | Active, Reactive, Apparent |
| Energy Measurement | Active, Reactive, Apparent |
| Frequency Measurement | 45...65 Hz |
| Harmonics Analysis | THD |
| Power Supply | AC 85-265V |
| Operating Temperature | -10°C to +55°C |
| Storage Temperature | -20 to +70 °C |
| Dimensions | 96 x 96 mm |
| Weight | Approx. 0.5 kg |
Essential guidelines for safe and correct operation of the device.
Detailed steps for connecting supply voltage and measurement circuits.
How to connect and perform voltage measurements on the device.
Procedure for connecting and measuring current with inputs I1 to I4.
Settings for transformers, network addresses, and parameters.
Configuring current and voltage transformer ratios.
