Instructions on use
Please read this operation manual as well as all other
publications that must be consulted for working with this
product (in particular, for the installation, operation or
maintenance).
Observe all safety instructions and warnings. Failure
to comply with the instructions can result in personal
injuries and/or damage to the product.
Any unauthorised changes or use of this device, which
go beyond the mechanical, electrical or otherwise stated
operating limitations, can result in bodily injury or/and
damage to the product.
Any such unauthorised change constitutes "misuse"
and/or "negligence" according to the warranty for
the product and thus excludes the warranty for covering
possible damage resulting from this.
This device must only be operated and repaired by
specialised personnel.
Specialised personnel are persons, that based on
their respective training and experience, are qualified
to recognise risks and prevent potential dangers that
c
If the device is not operated according
to the operation manual, protection is
no longer ensured and hazards can be
presented by the device.
m
Single core conductor must be provided
with core end sheath.
m
Only pluggable screw terminals with the same
number of poles and the same type of construction
are permitted to be connected together.
can be caused by the operation or maintenance of
the device.
Additional legal and safety regulations required for
the respective application are to be followed during
the use of the device.
To Next Page
Loading...
Need help?
General
