janitza UMG 804 - Page 20

20
Application Example
Main input CTs can be connected to
CT auxiliary terminal blocks.
Auxiliary CT Terminal Block: monitors
up to three auxiliary CTs per DIN Rail
CT Interface Floating Board, typically
used to monitor main input circuits.
Split core CTs are rated for different
types (see at technical data).
Molex connectors 1-21.
Smart Port: RJ45 connector used
to interface the CT strip with the
UMG 804.
UMG 804: hosts up to four fl oating in-
terface boards.
Network Cable: used to connect DIN
Rail CT Interface Floating boards.
1
2
3
4
5
6
7
1
3
2
7
5
6
4