33
Digital outputs
Quantity 2
Switching voltage 30 V DC
Switching current 100 mA maximum
Cable lenght screw in terminal block
Terminal connection capacity (digital inputs and outputs)
Rigid/flexible 22-16 AWG / 0.324-1.31 mm²
Flexible with core end sheath without plastic sleeve 22-16 AWG / 0.324-1.31 mm²
Flexible with core end sheath with plastic sleeve 22-16 AWG / 0.324-1.31 mm²
Tightening torque 5.0 Lb-In / 0.56 Nm
Stripping length 5 mm (0.2 in) recommeded
RS485 interface
x-wire connection
Protocol MODBUS-RTU
Transmission rate 9600, 19200, 38400, 57600, 115200 Baud
Termination resistor 120 Ω (consult manual on master device)
Ethernet interface
Connection 10/100
Function Supports Modbus output as well as direct polling
of HTML web pages from onboard server
Protocols Modbus TCP/IP, BACnet IP
Note: dual Ethernet ports to allow for connection of multiple devices without the requirement of
switch. REST protocols is supported.
To Next Page
Loading...
