4
1
For additional information about an-
ticipated transmission delays or failu-
res of the link, refer to NEMA ICS 1.1
(latest edition). Safety Guidelines for
the Application, Installation, and Main-
tenance of Solid-State Controls or its
equivalent in your specific country,
language, and/or location.
FCC Part 15 information Note:
This equipment has been tested by
the manufacturer and found to com-
ply with the limits for a class A digital
device, pursuant to part 15 of the FCC
Rules. These limits are designed to
provide reasonable protection against
harmful interference when the equip-
ment is operated in a commercial en-
vironment. This equipment generates,
uses, and can radiate radio frequency
energy and, if not installed and used
in accordance with the instruction ma-
nual, may cause harmful interference
to radio communications. Operation
of this equipment in a residential area
WARNING
LOSS OF CONTROL
· Assure that the system will reach
a safe state during and after a
control path failure.
· Separate or redundant control
paths must be provided for criti-
cal control functions.
· Test the effect of transmission
delays or failures of communica-
tion links.
1
· Each implementation of equip-
ment using communication
links must be individually and
thoroughly tested for proper ope-
ration before placing it in service.
· Failure to follow these instruc-
tions may cause injury, death or
equipment damage.
To Next Page
Loading...
Need help?
General
