EasyManuals Logo

janitza UMG 806 User Manual

janitza UMG 806
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
91
UMG 806www.janitza.com
Function Symbol Accuracy class Display range
Norm
Voltage U 0.2 0-999.9 kV
IEC61557-12
Current I 0.2 0-99,99 kA
IEC61557-12
Active power P 0.5 0-9999 MW
IEC61557-12
Reactive power Q 0.5 0-9999 Mvar
IEC61557-12
Apparent power S 0.5 0-9999 MVA
IEC61557-12
Power factor PF 0.5 0-1.000
IEC61557-12
Frequency F ±0.01 Hz 45.00 Hz-65.00 Hz
IEC61557-12
Active energy EP 0.5 s 0-99999999 MWh
IEC62053-22
Reactive energy EQ 2 0-99999999 Mvarh
IEC62053-23
Harmonic ratio of voltage THDu
1 (50 Hz)
5 (60 Hz)
0-99.99 %
IEC61557-12
Harmonic ratio of current THDi 0-99.9 9%
IEC61557-12
Sub-harmonic voltage component THDu 0-99.99 %
IEC61557-12
Sub-harmonic current component THDi 0-99.99 %
IEC61557-12
Voltage unbalance Uunb 0.5 --
IEC61557-12
Current unbalance Iunb 0.5 --
IEC61557-12
Phase sequence of the mains voltage -- 0.5 --
IEC61557-12
Phase position of the mains voltage /
mains current
-- ±0.1°
IEC61557-12
Phase sequence of the mains current -- 0.5 --
IEC61557-12
Extreme value -- 0.5 --
IEC61557-12
Consumption -- 0.5 --
IEC61557-12
Temperature T ±2° C --
--
16.3 Technical data of the modules
Transport and storage
The following specifications apply for devices transported and stored in the original packaging.
Free fall 1 m (39.37 in)
Temperature -40 °C (-40 °F) to +85 °C (185 °F)
Relative humidity 5 to 95 % RH at 77 °F (25 °C), non-condensing
Environmental conditions during operation
The device:
For weather-protected and stationary use.
Fulfills operating conditions according to DIN IEC 60721-3-3.
Has protection class II according to IEC 60536 (VDE 0106, part 1), a ground wire connection is not required!
Rated temperature range -40 °C (-40 °F) to +70 °C (158 °F)
Relative humidity 5 to 95 % at 77 °F (25 °C), non-condensing
Operating elevation < 2500 m (8200 ft) above sea level
Pollution degree 2
Ventilation No forced ventilation required.
Protection against foreign matter and water IP20 according to EN60529
806-EC1 module
Ethernet communication module
Interface RJ45 (10M)
Transmission technology IEE 802.3
Operating mode Server
MAC IEEE certification
IP Static, DHCP
Protocol Modbus/TCP, SNMP V2c
Function Modbus gateway
Isolation voltage 1.5 kV AC
General
806-EC1 806-EI1 806-ED1
Net weight
approx. 82 g
(0.18 lbs)
approx. 91 g
(0.20 lbs)
approx. 82 g
(0.18 lbs)
Device dimensions
Approx. B = 36 mm (1.42 in), H = 90 mm (3.54 in),
D = 63.5 mm (2.5 in)
Mounting orientation As desired
Installation - suitable DIN rails - 35 mm (1.38") According to EN 60715
Impact resistance IK04 according to IEC 62262

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the janitza UMG 806 and is the answer not in the manual?

janitza UMG 806 Specifications

General IconGeneral
Brandjanitza
ModelUMG 806
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals