Janome 415 - Power Connection and Foot Control

5
BASE
(TO REMOVE)
1. REMOVE THE FACE COVER, TOP COVER (SEE PAGE 4) AND BELT COVER.
2. REMOVE 6 SCREWS (B).
3. REMOVE THE BASE.
(TO ATTACH)
4. FOLLOW THE ABOVE PROCEDURE IN REVERSE.
BELT COVER
1. REMOVE THE FACE COVER AND TOP COVER (SEE PAGE 4).
2. LOOSEN SCREW (A).
3. TAKE THE BELT COVER OUT.
(TO ATTACH)
4. FOLLOW THE ABOVE PROCEDURE IN REVERSE.
(A)
BELT COVER
BASE
(B)
SERVICE ACCESS
(B)
(B)