Janome 415 - Presser Foot Handling

6
SERVICE ACCESS
FRONT COVER
(TO REMOVE)
1. REMOVE THE FACE COVER, TOP COVER, BELT COVER AND BASE (SEE PAGES 4-5).
2. REMOVE THE PATTERN SELECTOR DIAL.
3. LOOSEN SETSCREWS (A) AND (B), AND THEN, REMOVE THE FRONT COVER BY
REMOVING SETSCREWS (C) AND (D).
(TO ATTACH)
4. FOLLOW THE ABOVE PROCEDURE IN REVERSE.
FRONT COVER
(A)
(B)
(C)
(D)
PATTERN SELECTOR DIAL