17
UTILITY STITCHES
Straight Stitch
Machine setting
Pattern #1
Foot A: Zigzag foot
Thread tension Auto
¥
Starting to sew
Raise the presser foot and place the fabric on the
machine.
Lower the needle into the fabric where you want to start.
Lower the presser foot and start sewing.
NOTE: To fasten the beginning of the seams, sew
several reverse stitches by pressing the reverse
stitch button, or use pattern #02 (Lock-a-Matic
stitch).
¥
Changing sewing direction
Stop the machine and bring the needle down into the
fabrics by pressing the needle Up/Down button.
Raise the presser foot.
Pivot the fabric around the needle to change the sewing
direction as desired.
Lower the presser foot and start sewing in a new
direction.
Needle Up/Down button
¥
Fastening the seam
Sew several stitches in reverse by pressing the
reverse stitch button to fasten the end of seam.
NOTE: If you use pattern #02 (Lock-a-Matic stitch),
press the reverse stitch button once and the
machine will sew in reverse and stop
automatically.
Revers stitch button
Raise the presser foot and pull the fabric to the rear.
Draw the threads up and into the thread cutter. The
threads are cut at the proper length for starting the
next seam.
Thread cutter
01
9
0
Auto
1
2 3
1
2
3
1
2
3
1
2
3
3
1
2
3
1
2
To Next Page
Loading...
