32
9
0
Auto
1
2
3
16
Sensor
1
2
3
1
3
2
3
6
7
4
5
Corded Buttonholes
Machine setting
Pattern #16
Foot R: Automatic buttonhole foot
Thread tension Auto
With the buttonhole foot raised, hook the filler cord on
the cord spur on the back of the buttonhole foot.
Bring the ends toward you under the foot, and hook
the filler cord into the forks on the front of the foot to
hold them tight.
Spur
Forks
Cord
Lower the needle into the garment where the
buttonhole will start by turning the handwheel and
lower the foot. Depress the foot control and sew the
buttonhole over the cord.
NOTE: The sewing sequence is the same as the
automatic buttonhole.
Needle thread
Bobbin thread
Buttonhole mark
Starting point
Remove the fabric and pull the left end of the cord to
tighten it. Cut the excess cord.
1
2
3
4
5
6
7
1
2
3
1
2
3
To Next Page
Loading...
