Janome Craft 6600P - Threading the Machine (Continued)

www.toews.com
20
6
7
8
9
10
Threading the machine (continued)
Draw the thread down and around the tension
dial from the right to the left. Pull the thread up
to insert it between the tension disks and under
the loop of the check spring.
Be sure that the thread is coming out from
notch of the disk.
6 Check Spring
7 Notch
Firmly draw the thread up to the take-up lever
and down into its eye from the right to the left,
while holding the thread at the spool.
8 Eye of the Thread Take-up Lever
Draw the thread down through the lower thread
guide from the right.
9 Lower Thread Guide
Slip the thread behind the needle bar thread
guide on the left.
10 Needle Bar Thread Guide
Thread the needle from front to back by hand or
use the automatic needle threader.
b
n
m
,
.
Janome 6600 Instruction Manual
Janome Sewing Machine
www.toews.com
MC6600P Owners Manual/ User Guide