25
1
2
3
0
1
2
3
2
1
3
4
Adjusting the Foot Pressure
The foot pressure dial should be set at “3” for regular
sewing.
Reduce the pressure for appliqué, sewing on fine
synthetics and elastic fabrics.
Set the dial at “1” when sewing extra fine fabrics.
1 Foot Pressure Dial
2 Setting mark
3 Recommended Tension Setting
NOTE:
Do not reduce the foot pressure lower than “0”.
Dropping the Feed Dog
The feed dog can be lowered by the drop feed lever for
sewing on buttons, free motion embroidery, etc.
Shift the drop feed lever to the right to lower the feed
dog.
Shift the lever to the left to raise the feed dog, it will
return to the up position when starting the machine.
1 Drop Feed Lever
2 Down position
3 Up position
NOTE:
The feed dog should be in up position for normal
sewing. A message will appear on the LCD screen
when starting the machine with the feed dog lowered.
The machine will run with the feed dog lowered when
pattern D1, D2, 7, 8, 9 (Mode 1) and 11, 12, 13, 14,
15,16,
26, 29,61,62, 63 (Mode 2) has been selected.
The machine will not sew with the feed dog lowered
when other patterns have been selected.
4 Message on the LCD screen
Janome 6600 Instruction Manual
MC6600P Owners Manual/ User Guide
To Next Page
Loading...
